Contact Us

Tel:86-510-86961162

Fax:86-510-86961108

Mob:86-13921237861

E-mail: Info@aupujx.com

Add: No.32 Xiaying Road, Qiaoqi Xuxiake Town, Jiangyin City, Jiangsu Province 214424

Web:http://www.aupubaler.com

Home > News > Content
Hydraulic Shearing Machine More And More Widely Oct 26, 2017

Shearing machine, also known as crocodile shears, Hydraulic Shearing Machine metal shears, scrap shears, scrap shears, which are mainly used to cut long scrap metal into pieces for easy transportation and recycling. Each metal recycling company necessary equipment.

The mechanism of the shearing machine is: shearing machine frame (cast iron), blade, pressing plate, protective cover, console (automatic electrical operation box), Hydraulic Shearing Machine electrical system, commutation solenoid valve, oil pump, motor, fuel tank, wind Cold, shear cylinder, pressure plate cylinder.

The operating principle of the shearing machine is through the motor rotation, take the hydraulic oil inside the hydraulic tank, after the commutation of the role of the valve, driving the cylinder to run, the scrap metal cut into small pieces.

Shearing machine for raw materials are scrap iron, Hydraulic Shearing Machine copper, aluminum, catalyticconverter, hard drive and so on. Like all the equipment, Hydraulic Shearing Machine there are many models cut, how to choose the most suitable for their own cutting machine? This is mainly determined by the material of the customer's material, thickness with width or diameter to determine the type of shearing machine.

(1) the machine is equipped with a press plate with a protective cover, to avoid the operation of the human hand with the blade contact, more security

(2) with a foot switch, through the foot to control the machine's cutting, Hydraulic Shearing Machine for the sake of safety

(3) the machine generally use air-cooled, lower hydraulic oil temperature

(4) machine running: automatic operation (button operation)

(5) need to pay attention to matters: Let customers wrapped with plastic bags at both ends of the solenoid valve to prevent dust from entering, to prevent the solenoid valve stuck. Such as stuck, need to dismantle down with gasoline cleaning.

(6) small models with large models of the shear machine, Hydraulic Shearing Machine are using one machine design, eliminating the need for customer installation and commissioning, the customer received the machine, refueling can work, it is convenient

Automatic shearing machine is a precise control of sheet metal processing size, the large plate for automatic cutting equipment. Traditional automatic cutting machine using relay as a control device, the control system is more complex, parameter changes are not flexible, a large number of wiring to reduce system reliability, high maintenance rate, reducing production efficiency. PLC with its flexibility, Hydraulic Shearing Machine fastness, reliability and cost-effective features more and more enterprises or group designers are welcome, in a variety of industries more and more widely.

(1) control system sub-manual automatic file. Manual file, with a jogging way, the manual to complete the wear belt, zero calibration. Automatic file, Hydraulic Shearing Machine the system automatically cut sheet steel work.

(2) through the dial set plate steel shear size parameters, according to different needs to change its parameters.

(3) supporting fault analysis and electrical protection device, Hydraulic Shearing Machine if the operation is not normal, the system automatically stops and issued a warning signal.

(4) the accuracy of steel plate shear within a certain range, the shear size of 2m, the error does not exceed 1mm.