1. Poor heat dissipation of the metal packaging machine
Excessive dust on the surface of the radiator will cause heat generation and poor ventilation, which will lead to an increase in the oil temperature in the hydraulic oil tank; low liquid level and insufficient circulating oil system, leading to an increase in system temperature.
2. Selection of hydraulic oil
Hydraulic oil grades, especially the improper selection of viscosity index oils, will directly threaten the normal operation of the hydraulic system. The viscosity range and viscosity change of hydraulic oil should be as small as possible. Therefore, hydraulic oil should also be considered in specific regions and seasons; clearly defined oil standard machines should be filled in strict accordance with the requirements of the added hydraulic oil.
3. Improper pressure adjustment of the metal baler
The system pressure relief valve is adjusted too high to overflow and decompress normally, which will lead to increased internal leakage and temperature rise.
4. Suction of hydraulic pump
The air in the hydraulic pump is mixed with the air in the oil too much, forming a phenomenon of " cavitation erosion " . Under high hydraulic shock, accompanied by strong vibration and noise, the temperature rises rapidly.
5. Parts wear
Severe wear and tear of components in the hydraulic system can cause the system to overheat. Many components in the system rely on the sealing gap. Once the hydraulic components are worn, the internal leakage will increase, which will lead to an increase in temperature, a decrease in oil viscosity and an increase in internal leakage, which will further increase the oil temperature and form a vicious circle.
6. Leak
In the process of energy transfer, if the leakage is serious, the volume loss of the system will increase, and the energy loss will be converted into high temperature heat energy of the system. If the distance between the components is too small, the friction between relative movements will also increase the oil temperature, and the gap will be too large, resulting in serious oil leakage.
https://www.aupubaler.com/

