How does the gantry scrap shear work

Aug 30, 2024 Leave a message

What are the structural components of Scrap Metal Shear Machine

Mechanical structure:

Fuselage: As the foundation of the entire equipment, it provides stable support and is usually welded from steel plates into a box-shaped structure to ensure sufficient mechanical stability.

Shearing mechanism: It is mainly composed of upper knife seat, lower knife seat, shear knife, etc. It is the core component for shearing scrap steel. The upper knife seat and the power main oil cylinder usually adopt flange connection. Compared with some traditional connection devices (such as cross shaft and spherical bearing connection), this connection method is not easy to damage and is easy to maintain.

Hydraulic system: including hydraulic pump, hydraulic cylinder, control valve, oil tank, etc. The hydraulic pump converts mechanical energy into hydraulic energy and delivers high-pressure oil to the hydraulic cylinder through the hydraulic pipeline. The hydraulic cylinder generates thrust under the action of high-pressure oil, driving the upper knife seat to move up and down to achieve the shearing of scrap steel. The control valve is used to control the pressure, flow and direction of the hydraulic system to accurately control the action of the hydraulic cylinder. The oil tank is used to store hydraulic oil and provide oil source for the hydraulic system.

Electrical control system: responsible for controlling the operation of the entire equipment, such as start, stop, speed regulation and other functions, and can also realize operation modes such as inching and linked automatic cycle.

Feeding device: Common ones include conveyor belts and loaders, which are used to transport the scrap steel to be sheared to the shearing area of the equipment. Some equipment also has an automatic feeding box. After the scrap steel is added to the box by a steel grabber or overhead crane, the scrap steel can be automatically fed to the shearing area by the conveyor belt, and the feeding speed can be adjusted by the speed regulating motor.

Discharging device: sends the scrap steel out of the equipment after shearing for subsequent processing or transportation.

Working process:

Preparation stage: The piston of the side pressure cylinder drives the side pressure slide back into position, the pushing cylinder drives the pushing slide back into position, the door cover cylinder drives the door cover to open into position, and at the same time, the pressing cylinder and the shearing cylinder drive the pressing block and the scissors to descend into position, so that the material box is in an open state.

Feeding: Use a steel grab or overhead crane to add the scrap steel to be sheared into the feed box.

Extrusion molding: The piston of the side pressure cylinder pushes the side pressure slider forward, forming a side extrusion force on the scrap; at the same time, the door cover cylinder pushes the door cover to rotate 90° and close, forming a downward extrusion force on the scrap steel. The side pressure cylinder and the door cover cylinder work together to squeeze the scrap steel in the material box into strips (similar to sausages) in front of the discharge port.

Pushing and shearing: The pushing cylinder pushes the slider to push the strip of scrap steel in the material box forward. When it is pushed to the preset length, the pushing cylinder and the shearing cylinder drive the piston to rise, lifting the pressing block and the scissors. Then, after the pushing cylinder continues to push the material forward to the appropriate position, the pistons of the pushing cylinder and the shearing cylinder descend, the pressing block pushes the scrap material, and the shearing knife of the shearing machine cuts the scrap material.

Cyclic shearing: After a shearing is completed, the pressing cylinder and the shearing cylinder drive the piston to rise, and the pushing cylinder pushes the material according to the preset length under the control of the photoelectric switch, and then the pistons of the punching cylinder and the shearing cylinder descend to compress and shear the scrap steel. This cycle is repeated according to the process of "pushing-compacting-shearing-pushing-compacting-shearing" until all the scrap in the silo is sheared.

Discharging and re-feeding: the side pressure cylinder returns, the door cover opens, the material box is emptied, and it is ready to be refilled with scrap. If the equipment has two or three layers of silos, it can be fed and sheared at the same time during operation. When the scrap steel in the third layer of silo is sheared, the scrap steel in the upper silo will fall into the lower silo, and then the side pressure, pushing and shearing operations will be carried out.

In actual applications, gantry scrap steel shears of different models and specifications may have certain differences in specific structure and work flow, but the overall working principles are basically similar.

If you want to know more about the working principle of gantry scrap shears, welcome to contact Aupwit Industrial !

3 Horizontal Container Shear