Operation requirements of crocodile type scrap hydraulic shears are selected
Crocodile scrap hydraulic shears is a special tool for shearing steel plate, this tool is very good performance, so many fields can see the use of crocodile scrap hydraulic shears.
However, this type of machine has certain operational requirements when used.
Crocodile type hydraulic shears for scrap metal recycling companies, scrap mills, smelting enterprises, with various shapes of steel and various metal structures for cold shears, processing the qualified ingredients shears with hydraulic transmission, easy to operate, simple maintenance, shear from 63 tons to 400 tons a total of 8 grades.
Before using the crocodile type scrap hydraulic shears, check whether the parts are normal and whether the fasteners are firm.
Annealed steel parts, cast iron parts, soft metal parts, workpieces that are too thin, workpieces smaller than 100mm and workpieces that exceed the length of the scissors are prohibited.
When the crocodile type scrap hydraulic shears operate, the operators shall not leave their posts. When the work is completed or temporarily left, the power should be cut off.
And while the machine is in operation, it is not allowed to repair or touch the moving parts with hands. It is forbidden to use hands or feet to pressurize materials in the material box.
All lubrication places of crocodile type scrap hydraulic shears should be lubricated at least every shift according to requirements.