There are many factors that cause the work efficiency of the metal baler to be restricted: 1. It may be the hydraulic oil pump problem of the metal baler , for example, if its oil cannot reach the flow rate (oil inlet pipe leakage), a similar situation will occur. condition. If the overflow valve in the hydraulic baler is damaged (the plunger is severely worn), it will also seriously affect the output of the oil pump, thereby slowing down the oil supply speed. 2. It may be that the metal baler has a serious internal and external oil leakage. In this case, if it works quickly, it will cause the oil pressure to be too low, which will cause more serious consequences. In order to prevent the occurrence of the above-mentioned various situations, the hydraulic baler must be strictly inspected and tested by maintenance workers, and then used after troubleshooting, otherwise the consequences will be very serious.
https://www.aupubaler.com/