The scrap steel shearing machine does not have enough shearing pressure and does not move the scrap. What is the cause? The solution is as follows:
1. Whether the working pressure of the hydraulic system of the scrap steel shearing machine is normal, if it is low, adjust the pressure to the rated working pressure
2. Determine whether the oil pump of the scrap steel shearing machine is leaking, if it leaks, it needs to be replaced
3. Whether the oil cylinder is leaking, if it leaks, replace the sealing ring. Using the working principle of the hydraulic oil circuit of the shearing machine, the hydraulic oil is delivered to the integrated cartridge valve block, and the hydraulic oil is distributed to the upper cavity or the lower cavity of the cylinder through various one-way valves and overflow valves. Under the action of high-pressure oil, the oil cylinder is sheared! Check the integrated block under the electromagnetic. If possible, it can be cleaned with diesel.
The molding also ensures that the original material remains unchanged. Scrap shears? The flow control valve adjusts the flow rate by adjusting the orifice area between the valve core and the valve body and the local resistance generated by it to control the movement speed of the actuator. The flow control valve is divided into 5 types according to the purpose .
https://www.aupubaler.com/

