The scrap steel shearing machine is composed of four parts: the baler part, the gantry shear part, the hydraulic system and the electrical system; the baler part is composed of the body, the main cylinder, the left cylinder, the right cylinder and other parts; the gantry shear part is composed of the frame, The upper tool rest, the lower tool seat, the shearing cylinder, the material pressing cylinder, the material pressing frame, the guide plate, etc.; the frame is composed of two side frames, upper and lower beams, etc.
Scrap shears are mainly used for processing various metal scraps such as light and thin steel, steel bars, steel plates, nickel plates, steel plates, round steel, steel pipes, scrap copper, scrap steel, scrap iron, light metal structural parts, stainless steel, metal briquettes The packaging and cutting of metal objects such as car bodies, aluminum alloys, copper materials, etc. are used in waste material recycling stations, steel plants and metal products factories and other units to realize scrap metal recycling and metal profile cut-to-length cutting.
The hydraulic pipeline of the scrap steel shearing machine is also a very important link, and the hydraulic pump is also an important factor affecting the flow of hydraulic oil. Hydraulic pumps that have been used for too long are also prone to problems. When the speed of the hydraulic elevator slows down, check whether the oil supply flow of the hydraulic pump is stable. Therefore, when the speed of the hydraulic elevator slows down, the factor of hydraulic oil flow should be given priority. In addition, if the quality of the hydraulic oil is not good, there are a lot of impurities, which will block the speed and slow down, so the hydraulic oil should be changed in time to keep the hydraulic oil clean.
https://www.aupubaler.com/