The working principle of the scrap steel shearing machine is: the machine is installed on a horizontal foundation. When the scrap steel is cut, the scrap steel enters the compression slider and the shear slider from the feed port, and the compression mechanism is driven by the piston to compress and slide. The block moves downward to compress the scrap steel, and then the shearing piston drives the shearing slider and the blade to move downwards to start shearing. After the material is cut short, the shearing mechanism drives the shearing slider to move up to a suitable position to stop. At this time, the compression slider also moves up to the set position, and then the piston of the pushing cylinder in the feeding device starts to feed the material to the lower part of the compression slider and the shearing slider again, and the shearing cycle is repeated.
https://www.aupubaler.com/