1. Before starting, check the electrical system, oil circuit system, protection device and interlock protection device of the equipment to ensure reliability.
2. After driving, no-load live car should be carried out for no less than 20-30 minutes, and the operation can only be carried out when the operating oil temperature rises to 15-55 degrees Celsius. Starting with load is prohibited.
3. When filling or discharging, do not put your hand between the front and rear pistons to avoid squeezing the arm. Activation is prohibited.
4. Always observe the oil quantity, oil circuit, oil pressure, mechanical rolling and other conditions during the operation. If there is any abnormality, it should be stopped immediately for repair, and no operation with illness is allowed.
5. During operation, the operator should pay attention to whether the surrounding personnel are in a reliable position, and operate harmoniously to prevent misoperation.
6. After the operation, turn off the power of the equipment, maintain the equipment, and clean up the work site.
The reliable operation procedures of the metal briquetting machine mainly include the above six points, each of which plays an important role. Therefore, in order to ensure the reasonable use of the equipment, it is necessary to strictly follow the relevant operating procedures.
www.aupubaler.com
